Fagor BMF200X User Manual download pdf (Page 16)

16

Thoroughly dry all surfaces and removable

parts. Although this appliance automatically

defrosts, a layer of frost may occur on the

freezer compartment’s interior walls if the

freezer door is opened frequently or kept

open too long. If the frost is too thick,

choose a time when there is less food in the

unit and proceed as follows:

1. Remove existing food and all

accessories, unplug the appliance

from the outlet and leave the doors

open. Ventilate the room thoroughly to

accelerate the thawing process.

2. When defrosting is completed, clean

your freezer as described in the

“Cleaning and Care” section (page 15).

Caution! Don’t use sharp objects

to remove frost from the freezer

compartment. Only after the interior is

completely dry should the appliance be

plugged back in and switched back on.

Door Seal Cleaning

Remember to keep door seals clean. Sticky

food and drinks can cause seals to stick

to the cabinet and tear when you open the

door. Wash seal with a mild detergent and

warm water. Rinse and dry it thoroughly

after cleaning.

Caution! Only after the door seals are

completely dry should the appliance be

powered on.

Replacing the LED Light

Warning: If the LED light is damaged,

contact the customer service help line for

assistance at 1-877-743-2467. To replace

the LED light:

1. Unplug your appliance.

2. Remove the light cover by pushing up

and out.

3. Hold the LED cover with one hand and

pull it toward you with the other hand

while pressing the connector latch.

4. Replace LED light and snap correctly in

place.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 55 56

Comments to this Manuals

No comments