Fagor 2VFT-211AS User Manual download pdf (Page 15)

english

220-240V 3~ Nominal switch by phases

60 cm hob 14 A

>60cm hob 16,5 A

380-415V 3N~ Nominal switch by phases

60 cm hob 11 A

>60cm hob 13 A

380-415V 2N~ Nominal switch by phases

60 cm hob 16 A

>60cm hob 19 A

This appliance is compliant with European

directives 73/23/EEC and 89/336/EEC

Recommendation: The hob must be installed

by an authorised installer, who shall follow the

manufacturer’s instructions and diagrams.

Instruction Manual

Very important: Read this manual thoroughly before using the hob.

This manual is designed so that the texts relate to the corresponding illustrations.

Installation

Use

Identify the model of your hob (“a”, “b”, “c”,

“d”, “e”, “f”, “g”, “h”, “i”, “j”, “k”, “l”, “m”, “n”,

“o”) by comparing the number and layout of the

elements on your appliance with that shown in

the illustrations.

1.1 Unpacking. Remove all the protective

materials.

1.2 Insertion into the unit. Always take into

account the details on the characteristics

plate (1.2.1) and the measurements of

the unit into which the hob is going to be

inserted (1.2.2, 1.2.3). If you are not going

to ﬁ t an oven beneath the hob, you must

install a protective panel in accordance with

the measure indicated (1.2.4). Stick the foam

join along the outer edge of the hob to make

it watertight (1.2.5). Turn the hob over and

insert it into the hole (1.2.6). Secure it to the

unit with the four hooks supplied (1.2.7). Do

not use non-removable materials such as

silicone.

1.3 Connection to the power supply. The hob

is supplied with a power cable.

• With 5 wires: a) dark blue, b) light blue, c)

brown, d) red, e) green yellow. (1.3.1)

• Prepared for a 230V~ hob. (1.3.2)

• Prepared for a 220-240V~ hob: see table.

(1.3.3)

• Total power: 60cm hob 6.8kW,

>60cm hob 7.8kW

220-240V~ Nominal switch by phases

60 cm hob 30 A

>60cm hob 34 A

• If the type of connection is other than 220-

240V~, remove the cable and make the

connection as per diagrams (1.3.3, 1.3.4).

Identiﬁ cation

Clay, copper or stainless steel receptacles can

be used with vitroceramic hobs. Aluminium

receptacles are not recommended as they can

stain the glass of the hob.

2.1 Selecting the cooking zone. You have

various elements on which to place the

receptacles. Choose the most suitable one

depending on the size of the receptacle.

2.2 Turning on the hob. Press

for 3

seconds to turn on the hob; the

of the

different cooking zones will be activated.

N.B.: In order to be able to select whether

the child safety function is activated,

deactivate it by pressing the

key for 3

seconds (2.13)

2.3 Activating the element. Activate the

element on which you have placed the

receptacle by pressing the corresponding

key

(2.3.1, 2.3.2). or

press

(2.4.2)

N.B.: If you take longer than 5 seconds to

select the element, the hob will automatically

turn itself off, as a safety measure.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

Comments to this Manuals

No comments

Fagor 2VFT-211AS User Manual Page 15

Comments to this Manuals

Related products and manuals for Hobs Fagor 2VFT-211AS