Fagor ZFK1745X User Manual download pdf (Page 15)

Instruction manual

Very important: Please read this manual fully before using your freezer.

This manual has been designed so that the text is linked to the relevant drawings.

Installation

Identify the model of your freezer (“a”, “b”, “c”,

“d”, “e”) by comparing the control panel with the

illustrations.

Your freezer is a NO FROST model if NO FROST

appears on the control panel.

1.1 Unpacking. Remove all the protection.

1.2 Location. Position the freezer away from

heat sources and protected from direct

sunlight to reduce consumption.

Do not install the freezer outside or anywhere

it is exposed to rain.

Air must be able to circulate around the back

of the freezer. Leave 25 mm between the

back of the freezer and the wall behind it. Do

not block the space between your freezer

and the ﬂ oor or ceiling with any object.

Level the freezer to prevent any vibrations or

noise. Remember that if the freezer is located

next to a wall or cabinet, it might make a

small noise.

Also check that the shelves have been ﬁ tted

correctly, and place containers apart to

prevent any vibrations.

1.3 Electrical connection. Stand the freezer

upright for at least 2 hours before plugging

it in. Check the information on the

speciﬁ cations plate (220-240V earthed)

(1.3.1, 1.3.2).

Do not use any adapters or extension leads.

Make sure that the lead is not touching the

motor or trapped underneath it.

1.4 Changing the direction the door opens.

Unplug the freezer from the mains supply

and empty it completely.

Gently lay the appliance on its back (1.4.1).

Identiﬁ cation

english

Undo the screws (1.4.2) and remove the top

hinge and the rotating bushing with the aid of

a screwdriver (1.4.3).

Unplug by pressing on the connector tab

(1.4.4). Remove the freezer door (1.4.5).

Remove the control panel, levering it up

by inserting a screwdriver in the notches

provided for that purpose (1.4.6).

Make a notch for the lead on the other side,

in the area indicated on the casing (1.4.7).

Replace the control panel passing the lead

through the notch made (1.4.8).

Undo the screws from the bottom hinge and

remove it. Change the position of the pin in

the hinge and position it on the other side

(1.4.9).

Fit the door (1.4.11).

Remove the vertical handle and ﬁ t it on the

other side of the door turning it 180º (1.4.10).

Fit the closing capsule in the top hinge

space on the other side (1.14.12). Press the

connector to plug it into the door (1.4.13).

Fit the top hinge and the rotating bushing,

inserting any spare lead in the control panel

(1.4.14) and replace the screws (1.4.15).

Lift the freezer up carefully (1.4.16).

1.5 Levelling the appliance. Adjust the feet so

that it is tilting backwards slightly, to help the

door close correctly (1.5.1).

1.6 Climate class. This freezer is designed for

optimum functioning at a room temperature

of between +10ºC and +43º, climate class

SN-T (1.3.2). Higher or lower temperatures

may affect its performance.

2.1 Switching on the freezer. Press the

button (2.1.1) or (2.1.2). Press

until

a digit appears on the display (2.1.3) or turn

the control (2.1.4, 2.1.5). The display

or the On light

models will light up to

indicate the appliance is switched on.

The child lock is automatically activated in

Use

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 61 62

Comments to this Manuals

No comments

Fagor ZFK1745X User Manual Page 15

Comments to this Manuals

Related products and manuals for Refrigerators Fagor ZFK1745X