Fagor BMF200X User Manual download pdf (Page 7)

7

Door racks

2. Remove the upper cover on the top of

the refrigerator starting from the right

side and then remove the upper cover of

the upper door.

4. Remove the special ﬂ ange self-tapping

screws indicated in the image below and

the upper hinge below. Unplug the earth

wire indicated below.

Note: Please hold the upper door by hand

during step 4 to prevent door from dropping.

5. Remove the upper door by lifting

vertically and place it on a smooth

surface with the panel facing upwards.

Remove the handle covers and screw

hole covers, then remove special self

tapping screws. Remove the handle and

switch it to the right side, then install the

self-tapping screws, handle covers and

screw hole covers in reverse order from

which they were removed.

Loosen the self-tapping screws, detach

the stop block and door holder. With the

handle in place, reinstall the door holder

and the spare stop block found in the

plastic bag. Do not use the one you just

removed, that one must be stored in the

plastic parts bag.

Then remove the corner cover and the

upper hinge cover. Put all parts into the

plastic parts bag.

3. Disconnect reed switches shown in

images 1 and 2. Remove cover on the

cabinet body shown in image 3.

③Upper cover of upper door

②Upper hinge cover (right)

①Upper cover

④Corner cover

1

2

3

3

2

1

Special flange self-tapping

screws

Earth wire

①

②

③

1 2

② Special self-tapping screws

③ Handle

① Handle covers

④ Screw hole covers

⑤ Door holder

⑥ Stop block

⑦ Self-tapping screws

2

3

1

upper

hinge

1 2 3 4 5 6 7 8 9 10 11 12 ... 55 56

Comments to this Manuals

No comments